Changeset: 56239962
Speed limits etc from survey #Mapillary
Closed by southglos
Tags
created_by | JOSM/1.5 (13273 en_GB) |
---|---|
hashtags | #Mapillary |
source | survey; Mapillary; Mapbox Satellite |
Discussion
-
Comment from ndm
Not sure about the Great Brier Leaze mods, will resurvey.
-
Comment from southglos
Hiya. Which bits? I did the loop from Coniston Road - photos on Mapillary if it helps: https://www.mapillary.com/app/?lat=51.527178394656175&lng=-2.586732851343754&z=17&pKey=FfR3eSKtSQIgb3cVzTj7Mw&focus=photo
-
Comment from ndm
My recollection from walking it several times was that it was square at the housing estate end -- but I could be wrong -- the mapillary GPS loop of images looks pretty square. Needs surveying anyway to check any extra new/finished construction in the estate.
-
Comment from southglos
The old layout on the map had the 'exit' side in line with the traffic light junction and the two-way bit, and the 'entry' side coming off Highwood Road further northeast, and forming a rectangle. The Mapillary photo I linked to earlier shows the centre divider is in line with the traffic light junction, so I've joined the two ends to form a single junction at the lights, and at the other end, this photo: https://www.mapillary.com/app/?lat=51.52666961313366&lng=-2.5858083274239334&z=17.620163690018412&pKey=RIn6mqyUUPPhPZ6Ypvaw7g&focus=photo
shows the centre divider is in line with the two-way section, so I've moved the join point into the middle. That same photo also shows there's a 'U' shaped end to the split section, rather than right-angles.It's all fresh kerbs and tarmac, so may have changed from how it was laid out originally.
The one bit that does need a re-survey is where the cyclepaths run; the crossing were originally marked as puffins, but you can see the signals are pedestrian+bicycles, so I've changed them to toucans and have retagged some of the connected footpaths as cyclepaths, but it's incomplete and I suspect some bits may have moved around anyway.
Also, if you're re-surveying, the bus bit of Highwood Road is tagged as 20mph, but from the photos there's no 20mph sign at the traffic lights (where it's 30mph). I haven't changed it or untagged it, as there may well be a sign just a smidge further up the road out of camera shot, but worth checking if you're passing.
Cheers.
-
Comment from ndm
Your layout better matches what is on the ground now.
The 20mph limit is signed at the opposite end of the Highwood Road bus lane.
-
Comment from southglos
Cheers
- 203016813, v4
- 203016816, v3
- 203016818, v4
- 203016835, v3
- 203017317, v3
- 203017318, v3
- 203017319, v3
- 203017320, v3
- San Andreas roundabout (203303830), v5
- 244467458, v3
- 291823626, v2
- 291823627, v2
- 296222893, v5
- 308143210, v5
- Pegasus Road (326839639), v5
- Pegasus Road (326839641), v5
- Highwood Road (366950481), v3
- Great Brier Leaze (366950534), v2
- 366950540, v5
- 390319896, v5
Relations (11)
- 8009588, v1
- 8009589, v1
- 8009590, v1
- X73: Centre - M32 - Cribbs Causeway (2722052), v56
- 309: Thornbury - Bristol (2728622), v54
- 319: Cribbs Causeway - Bath (2732187), v67
- 4114813, v7
- 4875323, v2
- 5456706, v2
- 74: Centre - Cribbs Causeway (2721380), v74
- 73: Centre - Cribbs Causeway (2721381), v75
Nodes (1-20 of 24)
- 1
- 2
Welcome to OpenStreetMap!
OpenStreetMap is a map of the world, created by people like you and free to use under an open license.
Hosting is supported by Fastly, OSMF corporate members, and other partners.
https://openstreetmap.org/copyright | https://openstreetmap.org |
Copyright OpenStreetMap and contributors, under an open license |